Intel SR1625UR Service Guide - Page 36
Front of Server System, Peripheral Devices, Hard Disk Drives
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Front of Server System Peripheral Devices The server system provides locations and hardware for installing hard drives, CD-ROM drive, or DVD-ROM drive. The drives must be purchased separately. The following figure shows the available options. A B C A D TP02217 . A. Rack Handles B. Slimline Optical Drive C. Mini Control Panel D. Hard Disk Drive Bays (Optional HDD Carriers shown) Figure 9. Front Panel Features and Peripherals Hard Disk Drives The server system supports 2.5 inch SAS or Serial ATA (SATA) hot-swap drives. The system can support: • Up to eight 2.5 inch hard drives with the mini control panel. • Up to six 2.5 inch hard drives with the standard control panel or the Intel® Local Control Panel. For instructions on installing hard drives, see "Installing and Removing a Hot-swap Hard Drive" on page 59. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45°C. Note: The Intel® Server System SR1625UR does not support all SAS or Serial ATA (SATA) hard drives. For a list of supported hard drives, use the Server Configurator Tool. For a web link to this tool, see "Additional Information and Software" on page 3. 18 Intel® Server System SR1625UR Service Guide