Intel SR1625UR Service Guide - Page 94
Installing and Removing the RAID Battery Backup Unit (Active System Only)
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
b. Pull the DIMM out of the socket (see letter "C" in Figure 63).. Open Levers C RAID Mini DIMM B RAID Mini DIMM Socket Intel® RAID Activation Key Socket RAID Key A B BoMairddplane AF002862 Figure 63. Removing the Intel® Integrated RAID Activation Key and the RAID MiniDIMM 6. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 49. 7. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 44. Installing and Removing the RAID Battery Backup Unit (Active System Only) Installing the RAID Battery Backup Unit (BBU) To install the RAID battery backup unit, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 48. 3. Remove the power distribution board cover. For instructions, see "Replacing the Power Distribution Module" on page 84. 4. Open the RAID battery backup unit cover (see letter "A" in Figure 64) and connect the cable as shown (see letter "B" in Figure 64). 5. Close and latch the battery backup unit cover. 76 Intel® Server System SR1625UR Service Guide