Intel SR1625UR Service Guide - Page 61
Removing and Installing the PCI Riser Assembly, Removing the PCI Riser Assembly
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removing and Installing the PCI Riser Assembly Removing the PCI Riser Assembly To remove the PCI riser assembly, follow these steps: 1. Disconnect any cables attached to any add-in cards. 2. Grasp both riser latches with thumb and forefinger (see letter "A" in Figure 27), and pull up to release riser assembly. 3. Lift riser assembly straight up ( (see letter "B" in Figure 27). A A Riser Card Connector B AF002851 Figure 27. Removing PCI Riser Assembly from the Server System Caution: Place the riser assembly upside down to avoid damage to the riser card connector. 4. Do one of the following: - If you need to add or replace a PCI add-in card, see "Installing and Removing a PCI Add-in Card" on page 46. - If you need to add or replace a PCI riser connector, see "Replacing the PCI Riser Card" on page 45. Intel® Server System SR1625UR Service Guide 43