Intel SR1625UR Service Guide - Page 84
Installing and Removing the Intel® Remote Management Module 3, Installing the Intel® RMM3
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
5. Install the I/O expansion module filler panel(s) into the system back panel (see letter "C" in Figure 52). I/2O-SEoxcpk.eMt odule I/1O-SEoxcpk.eMt odule C Snap Standoff A B Standoff Hole Server Board Connector Filler Panel AF002856 Figure 52. Removing the I/O Expansion Module from the Server System 6. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 49. 7. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 44. Installing and Removing the Intel® Remote Management Module 3 Installing the Intel® RMM3 To install Intel® Remote Management Module 3, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 48. 66 Intel® Server System SR1625UR Service Guide