Intel SR1625UR Service Guide - Page 93
Removing the Intel® Integrated RAID Activation Key and the RAID Mini-DIMM, Removing the Intel
![]() |
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
c. Push firmly on the DIMM until it snaps into place and both levers close. Open Levers C RAID Mini DIMM B RAID Mini DIMM Socket Intel® RAID Activation Key Socket RAID Key A B BoMairddplane AF002861 Figure 62. Installing the RAID Activation Key and the RAID Mini-DIMM 6. Install the power distribution board cover. For instructions, see "Replacing the Power Distribution Module" on page 84. 7. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 49. 8. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 44. Removing the Intel® Integrated RAID Activation Key and the RAID Mini-DIMM To remove the Intel® Integrated RAID Activation Key and the RAID mini-DIMM, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 48. 3. Remove the Intel® Integrated RAID activation key by lifting straight up (see letter "A" in Figure 63). 4. Remove the power distribution board cover. For instructions, see "Replacing the Power Distribution Module" on page 84. 5. Remove the RAID mini-DIMM as follows: a. Open both socket levers (see letter "B" in Figure 63) Intel® Server System SR1625UR Service Guide 75
![](/manual_guide/products/intel-sr1625ur-service-guide-02b4d1e/93.png)