Intel SR1625UR Service Guide - Page 65
Removing a PCI Add-in Card, Installing the PCI Riser Assembly
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2. Remove the filler panel from the selected add-in card slot (see letter "A" in Figure 31). 3. Remove the screw (see letter "B" in Figure 31). 4. Insert add-in card until it seats in riser card connector (see letter "C" in Figure 31). 5. Secure the add-in card with screw (see letter "D" in Figure 31). Riser Connector A REMOVE Filler Panel B D C AF002853 Figure 31. Installing an Add-In Card 6. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 44. Removing a PCI Add-in Card To remove the PCI add-in card, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the screw securing the add-in card to the add-in card slot (see letter "A" in Figure 32) . 3. Remove the PCI add-in card from the riser card connector (see letter "B" in Figure 32). Intel® Server System SR1625UR Service Guide 47