Intel SR1625UR Service Guide - Page 92
Installing and Removing the Intel® Integrated RAID Activation Key and the RAID Mini DIMM (Active System Only), Installing the Intel® Integrated RAID Activation Key and the RAID Mini-DIMM
![]() |
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Installing and Removing the Intel® Integrated RAID Activation Key and the RAID Mini DIMM (Active System Only) Installing the Intel® Integrated RAID Activation Key and the RAID Mini-DIMM To install the Intel® Integrated RAID Activation Key and the RAID mini-DIMM, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 48. 3. Install the Intel® Integrated RAID activation key by pushing straight down into the RAID key socket (see letter "A" in Figure 62). Make sure the socket metal clips snap securely over top edge of key. 4. Remove the power distribution board cover. For instructions, see "Replacing the Power Distribution Module" on page 84. 5. Install the RAID mini-DIMM as follows: a. Open both socket levers (see letter "B" in Figure 62) b. Insert the DIMM into the socket (see letter "C" in Figure 62) making sure the connector edge of the DIMM aligns correctly with the slot. 74 Intel® Server System SR1625UR Service Guide
![](/manual_guide/products/intel-sr1625ur-service-guide-02b4d1e/92.png)