Intel SR1625UR Service Guide - Page 97
Installing the Server Board, Removing DIMMs on Removing, the Heatsink
![]() |
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
7. If installed, remove memory, processor heatsink(s), and processor(s) from the server board. For instructions, see "Removing DIMMs" on page 52 and "Removing the Heatsink" on page 57. 8. Remove the I/O expansion module, if installed. 9. Remove the Intel® RMM3, if installed. 10. Remove the nine screws from the server board (see letter "A" in Figure 66) and lift the server board from the server system (see letter "B" in Figure 66). A B AF002863 Figure 66. Removing the Server Board 11. Install the replacement server board. For instructions, see "Installing the Server Board" on page 79. Installing the Server Board To install the server board, follow these steps: 1. Place the server board into the server system (see letter "A" in Figure 67). 2. Attach the server board with nine screws (see letter "B" in Figure 67). Intel® Server System SR1625UR Service Guide 79
![](/manual_guide/products/intel-sr1625ur-service-guide-02b4d1e/97.png)