Intel SR1625UR Service Guide - Page 66
Removing and Installing the Processor Air Duct, Removing the Processor Air Duct
![]() |
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Riser Connector B A AF002854 Figure 32. Removing an Add-In Card Note: Make sure that the empty add-in card slot has the filler panel installed. 4. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 44. Removing and Installing the Processor Air Duct Always operate your server server system with the processor air duct in place. The air duct is required for proper airflow within the server system. Removing the Processor Air Duct To remove the processor air duct, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Lift the processor air duct from its location over the two processor sockets. 48 Intel® Server System SR1625UR Service Guide
![](/manual_guide/products/intel-sr1625ur-service-guide-02b4d1e/66.png)