Intel SR1625UR Service Guide - Page 76
Removing the Processor, Removing the Heatsink
View all Intel SR1625UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
B 3 A 2 1 TIM Discard to Install CPU 4 This Side Up C Discard to Install CPU This Side Up Figure 43. Removing the Heatsink Removing the Processor To remove the processor, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 43. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 48. 3. Remove the heatsink. For instructions, see "Removing the Heatsink" on page 57. 4. Unplug the processor fan cable from the server board. 5. Open the processor socket lever (see Figure 36). 6. Open the CPU load plate (see Figure 37). 7. Remove the processor. 8. If installing a replacement processor, see "Installing the Processor" on page 52. Otherwise, install the protective socket cover over the empty processor socket. 58 Intel® Server System SR1625UR Service Guide