JVC DLA-RS45U 288 page operation manual for D-ILA Projectors DLA-RS65, DLA-RS5 - Page 18
Main body - Warning display and con, rmation/response
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1 Getting started Controls and features (continued) Main body - Warning display and confirmation/response Warning display You are informed of the contents of warning notices by the (repeated) displays of the [WARNING] and [LAMP] indicators. Moreover, the [STAND BY / ON] indicator, which shows the operating mode of the unit, is displayed simultaneously as described above. Upon activation of the warning mode, the projection is interrupted at the same time for about 60 seconds and the cooling fan is turned on. Please disconnect the power plug from the electric socket after the cooling fan has stopped. Subsequently, please perform the following checks and take appropriate countermeasures. Lighting/flashing lights Blinking status diagram Frequency STANDBY/ON LAMP WARNING Mode display (*) (red) STANDBY/ON LAMP WARNING (orange) (red) Mode Simultaneous display flashing 1 times 2 times 3 times 4 times 1 times 2 times 3 times 4 times STANDBY/ON LAMP WARNING Mode (orange) (red) display 1 times 2 times Content Confirmation and countermeasures Abnormalities in the power supply Cooling fan stops Internal temperature is too high External temperature is too high Abnormal electrical circuit ● Check that nothing is blocking the air inlets. ● Check that the external temperature is normal. Action Leave the unit until it cools down. After that, turn on the power again. If something is wrong with the automatic lens cover Lamp does not light up and unit is unable to project Lamp is turned off during projection ● Check that an impact shock has not occurred during operation. ● Check that the lamp unit and lamp cover are correctly installed. ● Check that nothing is blocking the auto lens cover. 3 times Lamp cover is removed Action Turn on the power again. If the warning indication is displayed again, please wait for the cooling fan stopped, then pull out the power plug from the power outlet. Then call your authorized dealer for repair. (*) If the scheduled time for the replacement of the lamp is exceeded, the light might light up. 18