JVC DLA-RS45U 288 page operation manual for D-ILA Projectors DLA-RS65, DLA-RS5 - Page 37

ENGLISH 5 Adjust the shift (image position) Lens Control LENS Shift Select Back Operate BACK Adjust accordingly by pressing the up/down/left/right buttons ● After adjusting the image position, it may be necessary to select "Pixel Adjust" from the Settings menu "Installation". (Reference page: 66 to 67) ● Every time the LENS button is pressed, the adjustment item will be switched among "Focus", "Zoom" and "Shift". OK It can also be switched with the button. )RFXV =RRP 6KLIW LENS 6 Turn off power source STAND BY While a confirmation screen is displayed STAND BY STAND BY/ON Blinking (Red Lamp) MEMO About Cool Down mode ● The Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete. This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life. ● During Cool Down mode, the [STANDBY/ON] indicator blinks in red. ● After the Cool Down mode is complete, the unit automatically returns to standby mode. ● Do not pull out the power plug during Cool Down mode. This may shorten the lamp life and cause a malfunction. ● The slide cover will not close if the [Lens Cover] is set to [Open] in the [3. Installation] - [3-1. Lens Control] menu. (Reference page: 66) Operation Cool Down mode STAND BY/ON Light on (Red Lamp) ● When power off, the lens cover will be closed. 65 55 Set the lens cover. X475 ● The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time. ● You can also press the button on the unit to turn off the power. (Reference page: 16) ● Pull out the power plug when the unit will not be used for a prolonged time. 37