JVC DLA-RS45U 288 page operation manual for D-ILA Projectors DLA-RS65, DLA-RS5 - Page 54

3 Operation Adjustments and settings in the menu (continued) Color Temp. Gamma Normal A (3D) B (3D) Film 1 Film 2 Film 3 Film 4 A B C D Custom 1 Custom 2 Custom 3 Dark/Bright Level Dark Level Bright Level Picture Tone White Red Green Blue Contrast Brightness Color Tint Advanced Reset It is possible to set the color temp. To "[1-1] Color Temp." of the submenu It is possible to set the gamma curve. Please set to your preference. Settings: Normal, A (3D), B (3D), Film 1, Film 2, Film 3 Film 4, A, B, C, D, Custom 1, Custom 2, Custom 3 [Normal] Typically we recommend this setting. (*) You cannot configure Normal Mode when the "Picture Mode" is set to "Film" or "3D". A (3D), B (3D) can only be set, if the "Picture Mode" is "3D". This is a standard gamma curve for 3D. A (3D) will be brighter. Film 1, 2, 3, 4 can only be set if the "Picture Mode" is set to "Film" . This is a gamma curve that approximates the characteristics of an Eastman Kodak Company film for movies. 65 55 This is a gamma curve that approximate the gamma curve characteristics of a cinematographic film made by the FUJIFILM Corporation. This is a gamma curve that is even more focused on tone for the gamma of Film 1. This is a gamma curve that emphasizes more contrast for the gamma of Film 2. (*)You cannot configure A, B, C, and D when the "Picture Mode" is set to "Film" or "3D". In regard to normal gamma, this is a gamma curve focused on tone. This is a gamma curve for the film's unique S curve. This is a gamma curve that - in regard to the gamma of B - emphasized even more the feeling of contrast. For normal, this is a gamma curve where the intermediate gradations look very bright. (*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture Mode" is set to 3D. Under submenu "[1-2-2] Custom Gamma", it is possible to change the gamma curve and save it. The initial value of Custom 1, 2, and 3 is the same as for "Normal". Compensating darkness / brightness of an area. (*) It is possible to set it unless the "Picture Mode" is set to "Film". Settings: (makes dark areas darker) -7 to 7 (brightens dark areas) [0] Settings: (darkens bright areas) -7 to 7 (makes bright areas brighter) [0] You can reproduce the intensity of the exposure image. (*) This function can be configured when the "Picture Mode" is set to "Film" and "Gamma" is set to "Film 1-4". (*) "Video Tone" is displayed when the "Picture Mode" setting is anything except "Film". Settings: (The more under-exposure, the darker) -16 to 16 (the more over-exposure, the brighter) [0] Settings: (under-exposure to for red), -16 to 16 (over-exposure for red) [0] Settings: (under-exposure for green) -16 to 16 (over-exposure for green) [0] Settings: (under-exposure for blue) -16 to 16 (over-exposure for blue) [0] Adjusts the contrast of the video images. Settings: (blackish) -50 50 (whitish) You can adjust the brightness of the video image. Settings: (dark) -50 to 50 (bright) Adjust the color intensity of the video images. Settings: (dim), -50 to 50 (saturated) Adjusts the image tint of the video images. Settings: (reddish) -50 to 50 (greenish) Functions such as contour correction, custom gamma and color management can be set to sub-menu "[1-2] Advanced". Sets settings to default factory settings. 54