Konica Minolta bizhub PRESS C7000/C7000P IC-601 Color Centro User Guide - Page 163
Add the New Spot Color
View all Konica Minolta bizhub PRESS C7000/C7000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
11.9 Edit the RGB-CMYK Device Link Profile 11 Add the New Spot Color 1 Click [New]. A numbered line is added on [Adjustment Point]. 2 Specify the value (0 to 255) of the added point color of the added line to [R], [G] and [B]. Or, select the color from [Color Setting] screen displayed by clicking [Color Palette]. And click [OK]. The new input color is displayed on [Pointed Color]. 3 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color (below the [Result]) and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 4 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. IC-601 11-51