Konica Minolta bizhub PRESS C7000/C7000P IC-601 Color Centro User Guide - Page 164
Edit the Existing Point Color, Delete the Existing Point Color, Adjust the Profile Curve
View all Konica Minolta bizhub PRESS C7000/C7000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
11.9 Edit the RGB-CMYK Device Link Profile 11 Edit the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to edit. The input color is displayed on the lower of the Sample Color (below [Result]). 2 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 3 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Delete the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to delete. 2 Click [Delete]. The selected adjustment point is deleted. Adjust the Profile Curve 1 From [Adjustment Curve], select [Input] or [Output]. % When you execute the adjustment of input curve, select [Input]. % When you execute the adjustment of output curve, select [Output]. 2 Select the combination of colors from [Combination]. According to the selection from [Combination], [View] check box per each color and [Adjustment] radio button per each color appear. % When you select [Input], select [R/G/B] or [RGB]. % When you select [Output], select [C/M/Y/K], [CMY/K] or [CMYK]. % When you select [R/G/B] or [C/M/Y/K], you can adjust the profile curves of each color. % When you select [RGB] or [CMYK], you can adjust the consolidated profile curves of RGB or CMYK. % When you select [CMY/K], you can adjust the consolidated profile curve of CMY and the profile curve of K. 3 When you want to display the profile curve of one color, check [View] of that color. % When you want to hide the profile curve of one color, remove the check mark from [View] of that color. 4 When you want to adjust the profile curve of one color, select [Adj.] of that color. % When check mark of [View] for one color was not selected and you select [Adj.] for the same color, [View] is checked automatically. IC-601 11-52