Konica Minolta bizhub PRESS C7000/C7000P IC-601 Color Centro User Guide - Page 189
Edit the Existing Point Color, Delete the Existing Point Color
View all Konica Minolta bizhub PRESS C7000/C7000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
11.12 Edit the CMYK -CMYK Device Link Profile 11 3 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color (below the [Result]) and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 4 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Edit the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to edit. The input color is displayed on the lower of the Sample Color (below [Result]). 2 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 3 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Delete the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to delete. 2 Click [Delete]. The selected adjustment point is deleted. IC-601 11-77