Konica Minolta bizhub PRESS C7000/C7000P IC-601 Color Centro User Guide - Page 50
Remeasurement
View all Konica Minolta bizhub PRESS C7000/C7000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7.6 Remeasurement 7 7.6 Remeasurement This section describes how to obtain the multiple measurement results with succeeding a measurement. 0 According to the selected instrument, measurement operations differ. For detailed information on how to operate, refer to user's guide of each instrument. 0 You cannot change the instrument while measuring. 1 Click [3. Chart Measurement] - [Measure]. [Measure] screen appears. 2 From [Calibration Target], select the paper type. 3 Click [Start]. A measurement starts. % According to the selected instrument, the operation screen appears. Then, follow the instruction of the screen. % To stop the measurement, click [Stop]. % After acquirement of measurement data, [OK] becomes available. % When you click a color patch of the preview area, the corresponding line is selected in the meas- urement result list. On the other hand, when you select the line in the measurement result list, the corresponding color patch is selected in the preview area. 4 Click [OK]. [Measure] screen closes, and [Calibration] screen appears. The measurement result selected on [Measure] screen appears in the list of [Calibration] screen. % The measurement result is added to the list of [Calibration] screen at each remeasurement. % The measurement results can be recorded up to 10 in the list of [Calibration] screen. % At the 11th measurement, the first measurement result is discarded. % When you click [Cancel], the measurement result is discarded and [Measure] screen is closed to re- turn to [Calibration] screen. % The list of [Calibration] screen displays all measurement results, until the time when [Calibration] screen is closed or reset. 5 After the measurement, click the line of a measurement result to adopt from the list. % Go to the step described on page 7-10. IC-601 7-9