Kyocera ECOSYS P5021cdw ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Operation G - Page 130

Setup and Registration (System Menu) > System Menu Item Print Quality Gloss Mode EcoPrint Mode Resolution Page Setting Copies Orientation Wide A4 XPS FitTo Page TIFF/JPEG Size User Name Job Name Description Set the Print Quality. Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time. Values: Off, On IMPORTANT Gloss mode is not available when [LABELS] and [TRANSPARENCY] is selected as the paper type setting. Cassette1 (2) Type (page 6-6) MP Tray Type (page 6-6) Depending on the paper used, printing in gloss mode may cause curl in paper. To reduce curl, try using thicker paper. EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem. Values: Off, On Set the resolution used for printing. Value: 1200 dpi, 600 dpi NOTE Settings that are received from the printer driver have priority over the operation panel settings. You can set print preferences such as the number of pages and print orientation. Set the default number of copies, from 1 to 999. Value: 1 to 999 copies You can select portrait (upright) or landscape (sideways) page orientation. Value: Portrait, Landscape Turn this to on to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This setting is only effective in PCL 6 emulation. Value: Off, On Set the default value for the XPS fit to page function. Value: Off, On Select the image size (resolution) when printing JPEG or TIFF file. Value: Paper Size, Image Resolution, Print Resolution Set whether the user name set in the printer driver is displayed. Value: Off, On Set whether the job name set in the printer driver is displayed. Value: Off, Job Name, Job No.+Job Name, Job Name+Job No. 6-9