Kyocera ECOSYS P5021cdw ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Operation G - Page 57
Configuring the Connection by Using Push Button, Note the network name SSID, IP address, and password.
View all Kyocera ECOSYS P5021cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing and Setting up the Machine > Network Setup 4 [Menu] key key > [Wi-Fi Direct Set] > [►] key 5 Note the network name (SSID), IP address, and password. 6 Configure the handheld device. 1 [Settings] > [Wi-Fi] 2 Select the network name (SSID) appeared in step 5 from the list. 3 Enter the password that was provided in step 5 > [Connect] The network between this machine and the handheld device is configured. Configuring the Connection by Using Push Button When your computer or handheld device does not support Wi-Fi Direct but supports WPS, you can configure the network using push button. 1 Display the screen. 1 [Menu] key key > [Wi-Fi Direct Set] > [►] key 2 Enter the administrator ID and select the [OK] key. NOTE Enter an ID consisting of between 1 and 16 numbers. Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the cursor left or right. The factory default settings for the administrator ID is set as shown below. Model Name ECOSYS P5021cdn/ECOSYS P5021cdw ECOSYS P5026cdn/ECOSYS P5026cdw Administrator ID 2100 2600 3 Enter the administrator password and select the [OK] key. NOTE Enter a password consisting of between 0 (no settings) and 16 numbers. Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the cursor left or right. The factory default settings for the administrator password is set as shown below. Model Name ECOSYS P5021cdn/ECOSYS P5021cdw ECOSYS P5026cdn/ECOSYS P5026cdw Administrator Password 2100 2600 4 key > [Wi-Fi Direct] > [OK] key 2 Configure the settings key > [On] > [OK] key 2-26