Kyocera ECOSYS P5021cdw ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Operation G - Page 141

Setup and Registration (System Menu) > System Menu Item Sleep Timer Auto Error Clear Error Clear Timer FormFeed TimeOut Description Set amount of time before entering Sleep. Value For Europe 1 to 60 minutes (1 minute increments) Except for Europe 1 to 240 minutes (1 minute increments) Auto Sleep (page 2-28) If an error occurs during processing, processing stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. Value: Off, On If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Value: 5 to 495 seconds (in 5 second increments) NOTE This function is displayed when [Auto Err. Clear] is set to [On]. Receiving print data from the computer, the machine may sometimes wait if there is no information signaling that the last page does not have any more data to be printed. When the preset timeout passes, the machine automatically prints paper. The options are between 5 and 495 seconds. Value: 5 to 495 seconds (in 5 second increments) Sleep Level Set. [Menu] key key > [Device Common] > [►] key key > [Sleep Level Set.] > [►] key Item Description Sleep Level (models except for Europe) Select the Sleep level. Set the Energy Saver mode to reduce power consumption even more than Quick Recovery mode. Value: Quick Recovery, Energy Saver Network Card Reader*1 Set whether to use the Energy Saver mode for Network. Value: Off, On Set whether to use the Energy Saver mode for Card Reader. Value: Off, On NOTE When the machine enters Energy Saver, the ID card cannot be recognized. *1 Displayed only when the optional Card Authentication Kit is activated. 6-20