Kyocera ECOSYS P5021cdw ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Operation G - Page 178
Troubleshooting > Troubleshooting, Adjust/Maintenance, Service, Altitude Adj.
View all Kyocera ECOSYS P5021cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Troubleshooting > Troubleshooting Symptom Printed images are fuzzy. Checkpoints Is the device used in an environment with high humidity or where the temperature or humidity changes suddenly? ― Printed images are skewed. Is the paper loaded correctly? Corrective Actions Reference Page Use in an environment that has suitable ― humidity. Select the [Menu] key > [Adjust/Maintenance] ― > [Service] > [Drum] > [OK] > [OK]. Check the position of the paper width guides. page 3-2 Irregular horizontal lines ― appear in the image. The altitude is 1000 m or ― higher and irregular horizontal white lines appear in the image. Select the [Menu] key > [Adjust/Maintenance] ― > [Service] > [MC] > [OK] > [OK] and increase the adjustment value. Increase the adjustment value 1 level at a time from the current value. If there is no improvement after the value is increased by 1 level, increase by 1 level again. If there is still no improvement, return the setting to the original value. Select the [Menu] key > [Adjust/Maintenance] ― > [Service] > [Altitude Adj.], and set to an elevation one level higher than the current setting. The altitude is 1000 m or ― higher and dots appear in the image. Select the [Menu] key > [Adjust/Maintenance] ― > [Service] > [Altitude Adj.], and set to an elevation one level higher than the current setting. Printouts have vertical lines. ― Select the [Menu] key > [Adjust/Maintenance] ― > [Service] > [LSU] > [OK] > [OK]. Dirt on the top edge or back Is the interior of the machine dirty? of the paper. Clean the interior of the machine. page 8-2 8-10