Kyocera ECOSYS P5021cdw ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Operation G - Page 191

Troubleshooting > Adjustment/Maintenance 2 Select the [◄] or [►] key to change the L, V, and R items, select the [▲] or [▼] key to enter the values read from the chart, and select the [OK] key. To increase the value from 0 up to a maximum of 9, select the [▲] key. To decrease the value, select the [▼] key. Select [▼] to change the value from 0 to an alphabetical letter. Continue selecting to change from A through l. To move in the opposite direction, select [▲]. 3 Select the [OK] key. Magenta correction is completed. 4 Perform cyan and yellow correction as explained in steps 4 and 5. Detailed Registration 1 Load paper. IMPORTANT • Load the paper with the print side facing up. • After removing new paper from its packaging, fan the paper before loading it in the cassettes. Precaution for Loading Paper (page 3-2) • Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams. • Ensure that the loaded paper does not exceed the level indicator (see illustration above). • If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew or become jammed. 2 Display the screen. [Menu] key key > [Adjust/Maintenance] > [►] key key > [Registration Details] > [►] key 3 Print the chart key > [Print Registration Chart] > [OK] key > [OK] key A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), charts for H1 to 5 and V-1 to 5 are printed. 8-23