Kyocera KM-2030 Scan System A Instruction HB (Functions) - Page 31
Kyocera KM-2030 Manual
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-6 System Setting • DHCP/BOOTP The DHCP and BOOTP can be set to either "DISABLE" or "ENABLE". The factory default setting is "ENABLE". • RARP The RARP can be set to either "DISABLE" or "ENABLE". The factory default setting is "ENABLE". • DNS Server (Pri.) When a Host Name is used for transmitting data under an environment that uses a DNS server, register the IP address of the primary DNS server in this field in the following form: XXX.XXX.XXX.XXX • DNS Server (Sec.) Register the IP address of the secondary DNS server in this field in the following form: XXX.XXX.XXX.XXX • DNS Domain Name Register the domain name (up to 32 characters) in this field. • Registration Click on the Registration button to have all of the selected settings registered in the scanner interface card. IMPORTANT! If you go to another screen without clicking on the Registration button, any settings that have not been properly registered will be deleted and, therefore, will NOT be registered in the scanner interface card. Page 2-13