Lantronix G520 G520 User Guide - Page 129

10: Services Parameters Disk Usage Monitoring Disk Usage Monitoring Partition Minimum Space Include All disks Minimum Percent System Load Monitoring Load Monitoring Enable Load Monitoring 1 - Minute Max. Load 5 - Minute Max. Load 15 - Minute Max. Load Swap Space Threshold (in KB) Log File Monitoring Log File Monitoring File Path Description Monitors the minimum threshold specified in KB or as a percentage of the total disk space and registers an error if the available disk space is less than the minimum required space configured for it. Disk usage monitoring section also allows for monitoring of all disks found on the system according to a specified percentage threshold. (See Include all disks.) This table displays the disks being monitored for disk usage and provides options to add, edit, or delete items from the monitoring table.  Click Add to add an entry to the disk usage monitoring table. Enter the partition and space details as shown below.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table. Path where the disk is mounted. Minimum space or minimum percentage must be configured.  Minimum space required on the disk in KB before the errors are triggered.  Minimum space required on the disk as a percentage of the total disk space before the errors are triggered. Enables monitoring of all disks found on the system. Minimum space required as a percentage of total disk space of all disks before the errors are triggered. Note: The threshold for individual disks can be configured using the partition directives above. Displays the system load monitoring details if configured. Monitors the load average of the local system. Enables monitoring of system load averages The one-minute maximum load average before errors are triggered. The five-minute maximum load average before errors are triggered. The fifteen-minute maximum load average before errors are triggered. Amount of swap space (in KB) available on the local system. The default threshold is 16 MB and it is enabled by default. If the available swap space is less than 16 KB if not user-configured, or less than the configured value, and if Default Monitoring is enabled, it will generate a notification to SNMP traps. Monitors the size of the log files and registers an error if the size exceeds the maximum size configured for it. Limit: Up to 20 files can be monitored. This table displays log files being monitored for file size limits and provides options to add, edit or delete items from the monitoring table.  Click Add to add an entry to the log file monitoring table. Enter the details as shown below.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table. File path and name of the file to be monitored. G520 Series IoT Cellular Gateway User Guide 129