Lantronix G520 G520 User Guide - Page 46

Active content 4: Web Administration Interface The content pane displays status, configuration settings, and options for interacting with the gateway. It lets you view status, and configure settings on the gateway, or perform maintenance or other operations. Save Configuration Helper actions These actions let you save configuration changes or reset unsaved changes on the active page  Save & Apply - Applies and saves the changes on the web page to the gateway (in NVRAM) so that the settings will persist when the gateway is rebooted. After clicking this button, wait for the configuration to be applied before closing the browser, otherwise the old configuration will be restored.  Apply Unchecked - Click the arrow on the Save & Apply button to reveal this option. Applies and saves the changes on the web page to the gateway (in NVRAM), but will not disrupt the active network interface. Use this if you are changing the interface parameters on which the session is active.  Save - Saves the changes on the web page (to RAM) without committing the changes. All saved configuration will be lost when the gateway is rebooted if they are not saved and applied.  Reset - Discards the unsaved changes on the page. These actions help you use the web interface.  Help? - opens embedded help information for the active page  Auto Refresh on/off - lets you enable or disable the UI auto refresh action  Unsaved changes: - shows the number of unsaved changes and lets you save & apply the changes to the gateway's configuration or revert the changes back to the saved configuration.  Logout - logs you out of the web administration interface. Logging In The admin user or root user can log into the web admin interface. If your gateway is new, please inspect and set up the gateway as described in Chapter 3: Installation. To log into the web interface: 1. Open a web browser on the computer. G520 Series IoT Cellular Gateway User Guide 46