Lantronix G520 G520 User Guide - Page 58

7: Status Active DHCP and DHCPv6 Leases Status The Active DHCP Leases and DHCPv6 Leases shows information about the devices connected to the gateway using a DHCP lease. This includes IPv4 and IPv6 connections. Table 7-5 Active DHCP Leases Status Overview Parameters Host Name Description Name of the device (laptop, mobile, etc.) that is connected to the gateway and has been leased an IPv4 address or an IPv6 address by the gateway's DHCP server. IPv4 Address/IPv6 Address MAC Address IPv4 address or IPv6 address assigned to the device. Applies to IPv4. MAC address of the device. DUID Applies to IPv6. DUID (Device Unique Identifier) of the device connected. Leasetime remaining The remaining time for which the device can use the DHCP server leased IPv4 address. Wireless Status The Wireless section describes the status of the Wi-Fi network used by the gateway and the Wi-Fi associated stations. Parameters Connection Name Associated Stations Network MAC Address Host Signal/Noise Table 7-6 Wireless Status Overview Description Name of the connection and the details:  Type - The wireless radio chipset  Channel - Wi-Fi channel  Bitrate - Data transfer rate  SSID -Service Set Identifier (SSID) that uniquely names a wireless local area network (WLAN)  Mode - Displays whether the WLAN interface is currently configured as an access point (Master) or as a client of a higher order Wi-Fi network. Note: For Wi-Fi WAN (WWAN) operation, the connection mode should be 'Client'.  BSSID - Displays Basic Service Set Identification (BSSID); 24 bit MAC address of wireless device.  Encryption - Displays the data encryption method.  Associations - Displays the number of associated stations. Mode and name of the network to which the device is connected MAC address of the computers and/or devices that are connected Host name of the associated station Signal strength/noise in dBm G520 Series IoT Cellular Gateway User Guide 58