Lantronix G520 G520 User Guide - Page 171
Route type, Route table, Source Address, On-Link route
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Parameters MTU Route type Route table Source Address On-Link route 11: Network Description Enter the number of bytes indicating the largest physical packet size that the network can transmit. The default MTU size is 1500 bytes. Blank value represents auto MTU size Select the route type. Available options: unicast - route entry describes real paths to the destinations covered by the route prefix. local - destinations are assigned by this host. Packets are looped back and delivered locally. broadcast - destinations are broadcast addresses. Packets are sent as link broadcasts. multicast - special type used for multicast routing. unreachable - these destinations are unreachable prohibit - these destinations are unreachable. blackhole - these destinations are unreachable. Packets are discarded silently. Local senders get an ENVAL error. anycast - these destinations are anycast addresses assigned to this host. Define the table ID to use for the route. Specify the preferred source address when sending to destinations covered by the target. If enabled, the gateway is on link even if the gateway doesn't match any interface prefix. G520 Series IoT Cellular Gateway User Guide 171