Lantronix G520 G520 User Guide - Page 183

11: Network 2. Enter or modify the settings. See Table 11-30. 3. Click Save & Apply. Parameters Firewall mask Logging Update Interval Routing table lookup Table 11-30 MWAN Globals Configuration Description Enter the firewall mask value in hexadecimal, starting with 0x. Select to enable global firewall logging and select the log level. Enter the update interval for the interface routing table. Default is 5 seconds. Enter an additional routing table to be scanned for connected networks Interfaces Network > Load Balancing > Interfaces To view and add MWAN interfaces: 1. Go to Network > Load Balancing. 2. The MWAN Interfaces table is displayed. See Table 11-31. 3. Go to the bottom of the table, enter the interface name and click Add. 4. Enter the interface settings. See Table 11-32. 5. Click Save & Apply. Note: Configuring a large number of tracking IP addresses, a high ping count, or a low ping interval time will result in faster switchover but will consume more data. Parameters MWAN Interfaces Name Enabled Tracking method Tracking source Tracking reliability Ping interval Table 11-31 MWAN Interface Description Displays the interfaces and provides options to add, edit, or delete items from the table.  Enter the interface name (must match an existing interface name) and click Add to add member.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table. Name of the available Interface. Displays the Interface status. Yes for enabled No for disabled Displays the method used to track the interface. Displays the tracking source as address or interface. Displays the number of tracking IP addresses. The acknowledgment/ responses from these tracking IP addresses are considered to determine the interface as up or down. Displays the time in seconds between sending two successive ping packets. G520 Series IoT Cellular Gateway User Guide 183