Lantronix G520 G520 User Guide - Page 42
Connect the AC Power, Connect the Gateway to a Computer, Connect using Wi-Fi
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3: Installation Connect the AC Power To connect the AC power: 1. Connect the power cord to the power supply. 2. Attach the 3-pin connector end of the power cord to the DC input connector on the base unit. DC input - 3-pin connector 3. Plug the AC plug on the power supply into a standard AC receptacle. Connect the Gateway to a Computer To log into the web administration interface, first connect to the gateway's Wi-Fi access point or connect an Ethernet cable from the gateway's LAN Ethernet port to the computer's LAN Ethernet port. Connect using Wi-Fi To connect using Wi-Fi: 1. On your computer, open the Wireless settings and connect to the gateway's Wi-Fi access point. The default access point SSID is: Parameter SSID WPA/WPA2 TKIP Key Details Lantronix-- W1rele$$ 2. Open the web browser to 192.168.1.1. The login page appears. 3. Log into the web admin interface. The default username and password credentials are: User admin root Default Password admin L@ntr0n1x 4. You will be required to change the root and user passwords after the first login. After changing the initial passwords, log in again to configure the network settings. G520 Series IoT Cellular Gateway User Guide 42