Lantronix G520 G520 User Guide - Page 152
CELLULAR Interface, Network > Interfaces > CELLULAR
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
11: Network CELLULAR Interface Network > Interfaces > CELLULAR This page allows you to configure the Cellular interface parameters. When the Cellular interface is first enabled or when the gateway is factory reset, the gateway detects the GSM module and assigns the appropriate protocol. For descriptions of the protocol settings, see QMI Cellular. To edit the interface: 1. Go to Network > Interfaces, select CELLULAR and click Edit. 2. Configure the interface settings. Note: General Settings - Protocol should not be changed for the cellular interface. Firewall Settings - Firewall zone should be set as WAN zone. SIM1 / SIM2 Settings - Configure the SIM settings according to the SIM slot. 3. Click Save. 4. Click Save & Apply to save the configuration on the gateway. G520 Series IoT Cellular Gateway User Guide 152