Lantronix G520 G520 User Guide - Page 35
Power over Ethernet (PSE-PoE+), Product Label, Manufacturer Part Number, Product Revision
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2: Introduction Using a paper clip or similar object to poke through the RESET hole, press the recessed Reset button as shown in Figure 2-1. To reboot the unit, press and hold the reset button for more than 1 second and less than 5 seconds. To reset to factory settings, press and hold the reset button for more than 5 seconds and less than 20 seconds. Power over Ethernet (PSE-PoE+) The G520 series gateway (Security gateway SKUs only) can be used as an IEEE 802.3at PoE+ compliant power source (PSE) to supply power to a device attached to the LAN port. Each LAN port supports a maximum output of 30 W. This requires the PoE+ power supply (ACC-U301 accessory, supplied by user). Input Rated 46.75 - 60Vdc 10.8 - 46.74Vdc PoE Output Each PoE port loaded to 30W No PoE output Product Label Figure 2-9 Sample Product Label (G526 shown) Model Name Manufacturer Part Number Product Revision Country of Manufacturing Origin Serial Number Device ID QR Code G520 Series IoT Cellular Gateway User Guide 35