Lantronix G520 G520 User Guide - Page 135

10: Services Parameters Description Enable Enables the SNMPTRAP application. Ignore Authorization Failure Select to ignore authentication failure traps. SNMP-TRAP daemon configuration Version Specifies the SNMP version. Can be v1, v2c, or v3.  For v1, community and host are required.  For v2c, type, community, and host are required.  For v3, type, username, security level, and host are required. Community Specifies the community used for v1 and v2c authorization. Notifications using the specified community will be allowed to be processed per the notification handling configuration. User Name Enter the SNMP v3 username, as defined in VACM settings. Type Select the type as trap or inform. For information about SNMPv3 notification behavior and the difference between traps (unacknowledged) and informs (acknowledged), see the following tutorial: http://www.net-snmp.org/tutorial/tutorial-5/ commands/snmptrap-v3.html EngineID Specifies the EngineID value. For use only with SNMPv3 traps. Security Level Security level can be:  NoAuth,NoPriv - no authentication or privacy protocol  Auth,NoPriv - has authentication (MD5|SHA), no privacy protocol  Auth,Priv - has authentication (MD5|SHA), and has privacy protocol (DES|AES). Enter the authentication and privacy protocol type and passphrase as appropriate for the selection. Source Used for v1 and v2c authorization. The source field specifies that the configuration should only apply to notifications received from the listed sources. OID Specifies the OID defining the root of the subtree to add to or exclude from the named view. Logging Configuration Log Enables log. Logging Location Specifies where to log the notifications, either to a local file on the gateway or to the syslog. Select one:  Specific file - enter the file path.  syslog Format1 Specify the format used to display SNMPv1 traps. If no format is defined, the default Net-SNMP format will be provided. For information about the format specification, see http://www.netsnmp.org/docs/man/snmptrapd.html. Format2 Specify the format used to display SNMPv2c and SNMPv3 traps. SNMP v2c and v3 use the same PDU format. If no format is defined, the default Net-SNMP format will be provided. For information about the format specification, see http://www.netsnmp.org/docs/man/snmptrapd.html. Notifications Handling Execute Pass the details of the trap to a specified handler program. G520 Series IoT Cellular Gateway User Guide 135