Lantronix G520 G520 User Guide - Page 209
TCP Keep Alive Interval, AES Encrypt Key Type
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
17: Tunnel Host Field Address Port Protocol Secure Protocols TCP Keep Alive TCP Keep Alive Interval TCP Keep Alive Probes TCP User Timeout AES Encrypt Key AES Encrypt Key Type AES Decrypt Key AES Decrypt Key Type Initial Send Initial Send Type Credentials Validate Certificate Table 17-4 Host Configuration Description Enter the destination IP address or DNS address for the connection. Enter the TCP or UDP port number on the target host for the connection. Select the desired security protocol. SSL TCP TCP AES Telnet UDP UDP AES Configure the remaining protocol fields as determined by the protocol selection. When using SSL, select the secure protocols and the SSL credential. Protocol options are: SSL3 TLS1.0 TLS1.1 (default selected) TLS1.2 (default selected) TLS1.3 (default selected) Enter the time, in milliseconds, the gateway waits during a silent TCP connection before the first Keep Alive probe is sent to the remote host in order to keep the TCP connection up during idle transfer periods. Set to 0 to disable TCP Keep Alive, and blank the field to restore the default. Enter the time, in milliseconds, to wait between Keep Alive probes in order to keep the TCP connection up during idle transfer periods. Blank the display field to restore the default. Enter the number of TCP Keep Alive probes to send before closing the connection if no response is received. The probes are sent after the initial TCP Keep Alive probe is sent. Valid values are between 1 and 16. Blank the field to restore the default. Specify the amount of time the TCP segments will be retransmitted before the connection is closed. Enter the AES Encrypt Key. This configuration field becomes available when the TCP AES or UDP AES protocol is selected. Select Text or Hexadecimal to indicate format Enter the AES Decrypt Key. This configuration field becomes available when the TCP AES or UDP AES protocol is selected. Select Text or Hexadecimal to indicate format Enter the Initial Send character to be sent out the network upon connection establishment before any data from the line. It may contain one or more Directives of the form %. This configuration field becomes available when the TCP, UDP, or UDP AES protocol is selected. Select Text or Hexadecimal to indicate format. If SSL is the selected protocol, select an existing credential from the drop-down list. Go to SSL > Credentials to create, view, or edit SSL credentials. Select to enable validation of the SSL certificate on the server. This configuration field becomes available when the SSL protocol is selected. G520 Series IoT Cellular Gateway User Guide 209