Lantronix G520 G520 User Guide - Page 156
Switch, Protocol, Static Address, DHCP Client, PPPoE
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Figure 11-4 WAN Interface (Static Address) Configuration 11: Network 2. Configure the interface settings respective to the gateway. For protocol settings, see Static Address, DHCP Client, or PPPoE. General Settings - To change the WAN protocol, select the protocol and click the Switch Protocol button. Firewall Settings - Firewall zone should be set as WAN zone. DHCP Server - DHCP server should be disabled. Make sure to select "Ignore Interface." 3. Click Save. 4. Click Save & Apply to save the configuration. G520 Series IoT Cellular Gateway User Guide 156
11: Network
G520 Series IoT Cellular Gateway User Guide
156
Figure 11-4
WAN Interface (Static Address) Configuration
2.
Configure the interface settings respective to the gateway.
For protocol settings, see
Static Address
,
DHCP Client
, or
PPPoE
.
General Settings – To change the WAN protocol, select the protocol and click the
Switch
Protocol
button.
Firewall Settings – Firewall zone should be set as WAN zone.
DHCP Server – DHCP server should be disabled. Make sure to select "Ignore Interface."
3.
Click
Save
.
4.
Click
Save & Apply
to save the configuration.