Lantronix G520 G520 User Guide - Page 64
Traffic, Wireless, Status > Realtime Graphs > Traffic
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
7: Status Traffic Status > Realtime Graphs > Traffic The Traffic graph indicates the WAN-side incoming and outgoing traffic rate (y-axis) on the different interfaces over time (x-axis). The graphs display the average and peak data transfer on the following interfaces (if configured for WAN traffic): eth0, eth1, tun0, tun1, wwan0, can0, erspan0, br-lan, and wlan1. Average and peak rates are shown for inbound traffic (blue) and outbound traffic (green). The WAN interface shows average and peak WAN and cellular traffic. Figure 7-4 shows an example of network traffic for the eth1 interface: Figure 7-4 Realtime Network Traffic Graph (eth1) Wireless Status > Realtime Graphs > Wireless The Wireless graph indicates Wi-Fi usage including signal and noise levels (y-axis, dBm) and physical data transfer rate (y-axis, Mbit/sec) over time (x-axis). The top graph displays signal (blue) and noise (red) levels. The bottom graph displays the physical data transfer rate (green) irrespective of WI-Fi being used as an access point or client. Figure 7-5 shows the wireless usage graph for a G520 series device configured as Wi-Fi client (STA) and connected to an external access point. G520 Series IoT Cellular Gateway User Guide 64