Lantronix G520 G520 User Guide - Page 142

Parameters Network Watchdog Enable Time Wan as Lan Enable Interface Status 11: Network Description Select this box to enable or clear the box to disable the network watchdog. The network watchdog monitors the connectivity of all WAN (external network) interfaces. In the absence of connectivity resulting in Network down, the gateway resets itself. By default, the network watchdog is in enabled mode. If the network watchdog is enabled, enter the watchdog timeout in minutes. Select the box to enable the WAN port to act as a LAN interface. This will provide two LAN interfaces on the gateway. Figure 11-2 WAN Interface Status Parameters Protocol Uptime MAC Address RX TX IPv4 IPv6 Table 11-2 Wireless Overview and Associated Stations Description Protocol assigned to the interface Amount of time that the interface has been active since the last reconnection. MAC address of the physical interface. Note: MAC address is displayed for LAN, WAN, WWAN, and OpenVPN interfaces. Number of received bytes over the interface for the current session. Number of transmitted bytes over the interface for the current session. IPv4 address IPv6 address G520 Series IoT Cellular Gateway User Guide 142