Lantronix G520 G520 User Guide - Page 188

11: Network Rules Network > Load Balancing > Rules A rule specifies what traffic to match and what policy to assign for that traffic. The MWAN Rules page displays the rules and provides options to add, edit, or delete items from the table. The Rules page also lists key points to consider when configuring rules. To add MWAN rules: 1. Go to Network > Load Balancing > Rules. 2. The MWAN Policies table is displayed. See Table 11-37. 3. At the bottom of the Rules table, add a rule name and click Add. 4. Modify the configuration settings. See Table 11-38. 5. Click Save & Apply. Parameters MWAN Rules Name Source address Source port Destination address Destination port Protocol Policy assigned Errors Table 11-37 MWAN Rules Description Displays the rules and provides options to add, edit, or delete items from the table.  Enter a name and click Add to add rule.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table. Displays the rule name. Displays the Source IP address. Displays the Source port number. Displays the Destination IP address. Displays the Destination port number. Displays the protocols on which the rule is applicable. Policy to be applied to the rule. Displays if an error has occurred during the rule configuration. Error messages are displayed as warnings. Edit MWAN Rule To edit MWAN rules: 1. Go to Network > Load Balancing > Rules. 2. Select the rule name and click Edit. 3. Modify the configuration settings. See Table 11-38. 4. Click Save & Apply. Parameters Source address Table 11-38 MWAN Rules Configuration Description Enter the Source IP Address. G520 Series IoT Cellular Gateway User Guide 188