Lantronix G520 G520 User Guide - Page 90
Enable, Save & Apply, Save &
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
10: Services DLMS client sends the CSV file to FTP. DLMS is available on both RS-232 and RS-485 serial interfaces. To configure the DLMS client: 1. Go to Services > DLMS Client. 2. Click Enable to enable the DLMS client on the gateway. 3. Under DLMS Configuration, enter the configuration information. See Table 10-2. Table 10-2 DLMS Client Configuration Parameters Enable DLMS meter make Client address Server address Instantaneous profile read time Billing profile read time Load profile recording period 1 read time Duration for load profile recording period 1 Load profile recording period 2 read time Event profile read time Description Click to enable the DLMS client. Secure Meters option is selected. The Secure meter default password is used by the back end. The option Others may be available. If selected, enter the meter password. Enter the DLMS client address. The length is 8 bits. Enter the DLMS server address. Enter the time interval in minutes that the instantaneous profile data will be read Enter the time interval in minutes that the billing profile data will be read. Enter the time interval in minutes that the load profile for recording period 1 will be read. Select the duration in months of the load profile recording period. Enter the time interval in minutes that the load profile for recording period 2 will be read. Enter the time interval in minutes that the event profile data will be read. 4. Under Data Send Configuration, enter the FTP server settings to where the client will send the information. See Table 10-3. Parameters Protocol IP/URL Port Username Password Path File name Table 10-3 DLMS Data Send Configuration Description FTP IP address or URL of the FTP server 21 Username of the FTP server Password of the FTP server File path of the FTP server where the CSV file will be saved File name of the CSV file 5. Click Save & Apply. 6. Configure the Serial 1 (RS-232) or Serial 2 (RS-485) line mode to DLMS client. Click Save & G520 Series IoT Cellular Gateway User Guide 90