Lantronix G520 G520 User Guide - Page 43
Connect using Ethernet, Default Configuration, Web Admin Wireless Access Point SSID
View all Lantronix G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3: Installation Connect using Ethernet To connect using Ethernet: 1. Connect an RJ-45 terminated Ethernet cable between the LAN Ethernet port on the unit and the LAN Ethernet port on the computer. 2. Open the web browser to 192.168.1.1. The login page appears. 3. Log into the web admin interface. The default username and password credentials are: User admin root Default Password admin L@ntr0n1x 4. You will be required to change the root and admin user passwords after the first login. After changing the initial passwords, log in again to configure the network settings. Default Configuration All usernames and passwords are case sensitive. Web Admin Page User admin root Table 3-3 Default Web Admin Page Credentials Default Password admin L@ntr0n1x Note: Upon first login, you are required to change the factory default passwords before any other gateway configuration can be done. Both the admin and root passwords must be changed. Wireless Access Point SSID Parameter SSID WPA/WPA2 TKIP Key Table 3-4 Default Wireless Access Point SSID Details Lantronix-- W1rele$$ Default Interface Configuration Interface WAN (Ethernet) Table 3-5 Default Network Interface Configuration Details Automatic (DHCP client) Priority source of Internet with cellular backup G520 Series IoT Cellular Gateway User Guide 43