Lantronix SLC 8000 Advanced Console Manager User Guide - Page 140

Figure 7-3 Services > SNMP (2 of 2) 7: Services 2. Enter the following: Enable Agent Top Level MIB (link) SLC MIB (link) SLC MON MIB (link) Enable v1 Enable v2c Enable v3 Enable TLS Port Enables or disables the Simple Network Management Protocol (SNMP) agent, which allows read-only access to the system. Disabled by default. Click the link to access the top level MIB file for all Lantronix products. Click the link to access the SLC MIB definition file for SLC 8000 advanced console managers and advanced console managers. Click the link to access the SLC monitor MIB definition file for SLC 8000 advanced console managers and advanced console managers. If selected, SNMP version 1 is enabled, and the default is disabled. SNMP version 1 uses the Read-Only and Read-Write Communities for authentication. If selected, SNMP version 2c, is enabled, and the default options are enabled. SNMP version 2c uses the Read-Only and Read-Write Communities for authentication If selected, SNMP version 3 is enabled, and the default is disabled. SNMP version 3 uses configurable security parameters, and Read-Only, Read-Write and Trap Communities for authentication. If selected, SNMP version 3 over TLS (which uses X.509 certificates for authentication) is enabled, and the default is disabled. You must enable SNMP v3 to enable TLS. Indicates the port number that the TLS agent listens to. The port number of the traps sent over TLS will be the next port number. For example, if the Enable TLS port is 10161, the Enable Traps over TLS port number will be 10162. SLC™ 8000 Advanced Console Manager User Guide 140