Lantronix SLC 8000 Advanced Console Manager User Guide - Page 306

12: User Authentication Secure Lantronix Network Right to view and manage secure Lantronix units (e.g.,Spider, or SLC units) on the local subnet. Date/Time Right to set the date and time. Reboot & Shutdown Right to shut down and reboot the SLC unit. Local Users Right to add or delete local users on the system. Remote Authentication Right to assign a remote user to a user group and assign a set of rights to the user. SSH Keys Right to set SSH keys for authenticating users. User Menus Right to create a custom user menu for the CLI. Web Access Right to access Web-Manager. Diagnostics & Reports Right to obtain diagnostic information and reports about the unit. Firmware & Configuration Right to upgrade the firmware on the unit and save or restore a configuration (all settings). Selecting this option automatically selects Reboot & Shutdown. Internal Modem Right to update internal modem settings. Device Port Operations Right to control device ports. Device Port Configuration Right to enter device port settings. USB Right to enter modem settings for USB devices and control USB storage devices. SD Card Right to enter settings for SD card. RPM Right to manage and control remote power managers. 5. Click the Apply button. Note: You must reboot the unit before your changes will take effect. Kerberos Commands Go to Kerberos Commands to view CLI commands which correspond to the web page entries described above. TACACS+ Similar to RADIUS, the main function of TACACS+ is to perform authentication for remote access. The SLC 8000 advanced console manager supports the TACACS+ protocol (not the older TACACS or XTACACS protocols). The system administrator can configure the SLC unit to use TACACS+ to authenticate users attempting to log in using the Web, Telnet, SSH, or the console port. Users who are authenticated through TACACS+ are granted device port access through the port permissions on this page. All TACACS+ users are members of a group with associated predefined user rights. You may add additional user rights that are not defined by the group. SLC™ 8000 Advanced Console Manager User Guide 306