Lantronix SLC 8000 Advanced Console Manager User Guide - Page 244

9: Device Ports print("RADIUS command returned: " + s2.split("\\n")[0]) proc.stdin.close() proc.terminate() proc.wait() sys.exit(1) print("RADIUS settings updated and enabled.") proc.stdin.close() proc.terminate() proc.wait() sys.exit(0) Python Custom Script - SLC CLI Session An example of a Python Custom Script that uses the Pexpect module to interact with the CLI session and the device ports to detect the prompt on any devices connected to the SLC, and set the device port name to be the same as the device prompt: #! python # Script to detect the prompt on a device connected to a SLC or SLB device port, # and set the device port name to the prompt. Punctuation characters are # removed and the device port number is appended to the name. Prompts ending # in '>' are detected. For example, for a Cisco device attached to device # port 3 and displays this prompt: # engcisco_cat3560> # the name for device port 3 will be set to "engcisco_cat3560-3" import pexpect import datetime import time import sys import re now = datetime.datetime.now() print("Detecting devices on SLC at ", end="") print(now.strftime("%Y-%m-%d %H:%M")) # start the CLI session to get number of device ports p=pexpect.spawn('clisession -U sysadmin') slcPrompt = "" numPorts = 0 loggedIn = False while not loggedIn: i = p.expect([pexpect.TIMEOUT, pexpect.EOF, 'Model Number: SLC80(\d*)\r\n', 'Model Number: SLB882\r\n timeout=10) if i == 0: # Timeout SLC™ 8000 Advanced Console Manager User Guide 244