Lantronix SLC 8000 Advanced Console Manager User Guide - Page 275

Figure 11-1 Terminal Server 11: Connections SLC 8000 Advanced Console Manager Server Serial Connections Telnet Sessions (via Network connection) VT100 Terminals Remote Access Server In this setup, the SLC 8000 advanced console manager is connected to one or more modems by its device ports. Configure the device ports on the Device Ports > Settings (1 of 2) web page by selecting the Dial-in option in the Modem Settings section. Most customers use the modems in PPP mode to establish an IP connection to the SLC unit and either Telnet or SSH into the SLC 8000 advanced console manager. They could also select text mode where, using a terminal emulation program, a user could dial into the SLC unit and connect to the command line interface. Figure 11-2 Remote Access Server Phone System SLC 8000 Advanced Console Manager Serial Modems Connections Network Connections Internal Network Reverse Terminal Server In this scenario, the SLC 8000 advanced console manager has one or more device ports connected to one or more serial ports of a mainframe server. Users can access a terminal session by establishing a Telnet or SSH session to the SLC unit. To configure the SLC console manager, select the Enable Telnet In or Enable SSH In option on the Device Ports > Settings (1 of 2) page. Figure 11-3 Reverse Terminal Server PC Unix Server SLC 8000 Advanced Console Manager PC Serial Sessions Telnet/SSH PC Sessions SLC™ 8000 Advanced Console Manager User Guide 275