Lantronix SLC 8000 Advanced Console Manager User Guide - Page 142

7: Services Alarm Delay Engine ID Location Contact Number of seconds delay between outgoing SNMP traps. The unique SNMP engine identifier for the SLC. This identifier may be required by the NMS in order to received v3 traps. Physical location of the SLC 8000 advanced console manager (optional). Useful for managing the SLC unit using SNMP. Up to 20 characters. Description of the person responsible for maintaining the SLC 8000 advanced console manager, for example, a name (optional). Up to 20 characters. v1/v2c Communities Read-Only Read-Write Trap A string that SNMP agent provides. The Read-Only Community is used for SNMP v1 and v2c. The default is public. A string that acts like a password for an SNMP manager to access the read-only data from the SLC unit SNMP, like a password for an SNMP manager to access the readonly data the SLC SNMP agent provides, and to modify data where permitted. The Read-Write Community is used for SNMP v1 and v2c. The default is private. The trap used for outgoing generic and enterprise traps. Traps sent with the Event trigger mechanism still use the trap community specified with the Event action. The default is public. Version 3 Security Auth with Encrypt with Levels of security available with SNMP v 3.  No Auth/No Encrypt: No authentication or encryption.  Auth/No Encrypt: Authentication but no encryption. (default)  Auth/Encrypt: Authentication and encryption. For Auth/No Encrypt or Auth/Encrypt, the authentication method:  MD5: Message-Digest algorithm 5 (default)  SHA: Secure Hash Algorithm  SHA2: Secure Hash Algorithm 2: SHA2_224, SHA2_256, SHA2_384, and SHA2_512 Encryption standard to use:  DES: Data Encryption Standard (default)  AES: Advanced Encryption Standard  AES192: Advanced Encryption Standard with 192-bit length  AES256: Advanced Encryption Standard with 256-bit length V3 User Read-Only User Name SNMP v3 is secure and requires user-based authorization to access SLC MIB objects. Enter a user ID. The default is snmpuser. Up to 20 characters. Password/Retype Password for a user with read-only authority to use to access SNMP v3. The default is Password SNMPPASS. Up to 20 characters. Passphrase/ Retype Passphrase Passphrase associated with the password for a user with read-only authority. Up to 20 characters. If this is not specified it will default to the v3 Read-Only Password. SLC™ 8000 Advanced Console Manager User Guide 142