Lantronix SLC 8000 Advanced Console Manager User Guide - Page 450

15: Command Reference show syslog clear Syntax show syslog clear Description Clears one or all of the system logs. Temperature Commands set temperature Syntax set temperature Parameter low high calibrate Note: The calibration offset will be applied one hour after setting the value. Description Sets the acceptable range for the internal temperature sensor (an SNMP trap is sent if the temperature is outside of this range). Temperatures can be entered in either Celsius or Fahrenheit; to indicate a temperature is Fahrenheit, append the degrees with an 'F', i.e., "75F". show temperature Syntax show temperature Description Displays the acceptable range and the current reading from the internal temperature sensor. SLC™ 8000 Advanced Console Manager User Guide 450