Lantronix SLC 8000 Advanced Console Manager User Guide - Page 172

8: USB/SD Card Port Figure 8-4 Firmware and Configurations - Manage Files Note: The Delete, Download, and Rename options are at the bottom of the page (Figure 8-4). 2. To delete a file, click the check box next to the filename and click Delete File. A confirmation message displays. 3. To download a file, click the Download File button. Select the file from the list. 4. To rename a file, click the check box next to the filename and enter a new name in the New File Name field. 5. Click Rename File. USB Modem Settings To enter USB modem settings for a USB: 1. Insert any of the supported USB modem devices into the USB port on the front of the SLC unit. You can do this before or after powering up the console manager. 2. Log into the SLC unit and click Devices. 3. Click USB / SD Card. Figure 8-1 shows the page that displays. Your USB device should display in the appropriate row of the USB ports / SD card table if you have inserted it. If it does not display and you have inserted it, refresh the web page. 4. Click the radio button (on the far right) for Port U1 or U2. 5. Click Configure. Figure 8-5 shows the page that displays if a USB modem is inserted in Port U1, or Port U2, if that port is selected. SLC™ 8000 Advanced Console Manager User Guide 172