Lantronix SLC 8000 Advanced Console Manager User Guide - Page 202

9: Device Ports 4. Click the Apply button. 5. To view the status detected by the Sensorsoft, click the Show Status link in the far right column of the table. Figure 9-10 Sensorsoft Status Device Port Commands Go to Device Port Commands to view CLI commands which correspond to the web page entries described above. Device Commands Go to Device Commands to view CLI commands which correspond to the web page entries described above. Interacting with a Device Port Once a device port has been configured and connected to an external device such as the console port of an external server, the data received over the device port can be monitored at the command line interface with the connect listen command, as follows: To connect to a device port to monitor it: connect listen deviceport In addition, you can send data out the device port (for example, commands issued to an external server) with the connect direct command, as follows: To connect to a device port to monitor and/or interact with it, or to establish an outbound network connection: connect direct endpoint is one of: deviceport ssh [port ][] where: SLC™ 8000 Advanced Console Manager User Guide 202