Lantronix SLC 8000 Advanced Console Manager User Guide - Page 180

8: USB/SD Card Port IP Settings Service The available connection services for this USB Port (Telnet, SSH, or TCP). Only one can be active at a time. The default is None. Telnet Port Telnet Port Telnet session port number to use if you selected Telnet. Defaults:  USB Port U1: 2049  USB Port U2: 2050  Range: 1025-65535 SSH Port The SSH session port number to use if you selected SSH. Defaults:  USB Port U1: 3049  USB Port U2: 3050  Range: 1025-65535 TCP Port The TCP (raw) session port number to use if you selected TCP. Defaults:  USB Port U1: 4049  USB Port U2: 4050  Range: 1025-65535 Authenticate If selected, the console manager requires user authentication before granting access to the port. Authenticate is selected by default for Telnet Port and SSH Port, but not for TCP Port. 7. To save settings for just this port, click Apply. USB Commands Go to USB Access Commands, USB Device Commands, USB Storage Commands, USB Modem Commands, and USB Serial Commands to view CLI commands which correspond to the web page entries described above. SD Card Commands Go to SD Card Commands to view CLI commands which correspond to the web page entries described above. SLC™ 8000 Advanced Console Manager User Guide 180