Lantronix SLC 8000 Advanced Console Manager User Guide - Page 93

Figure 6-7 Network > IP Filter 6: Basic Parameters Mapping Rulesets The administrator can assign an IP Filter Rule Set to a network interface (Ethernet interface), a modem connected to a device port, or a USB modem or an internal modem (if installed). To map a ruleset to a network interface: 1. Click the Network tab and select the IP Filter option. The Network > IP Filter page displays. 2. Select the IP filter rule set to be mapped. 3. From the Interface drop-down list, select the desired network interface and click the Map Ruleset button. The Interface and rule set display in the IP Filter Mappings table. To delete a mapping: 1. Click the Network tab and select the IP Filter option. The Network > IP Filter page displays. 2. Select the mapping from the list and click the Delete Mappings button. The mapping no longer displays. 3. Click the Apply button. Enabling IP Filters On the Network > IP Filter page, you can enable all filters or disable all filters. Note: There is no way to enable or disable individual filters. To enable IP filters: SLC™ 8000 Advanced Console Manager User Guide 93