Lantronix SLC 8000 Advanced Console Manager User Guide - Page 354
Dial-in (Text Mode) to a Remote Device, Welcome to the SLC Console Manager
View all Lantronix SLC 8000 Advanced Console Manager manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
14: Application Examples 6. Use the escape sequence to escape from direct mode back to the command line interface. Dial-in (Text Mode) to a Remote Device This example shows a phone line connection to the internal modem of the SLC, and a Sun server connected to a device port. You can configure the modem for text mode dial-in, so a remote user can dial into the modem using a terminal emulation program and access the Sun server. Remote User Figure 14-3 Dial-in (Text Mode) to a Remote Device Sun UNIX Server Phone System Phone Line Serial Cable to Port 2 SLC 8000 Advanced Console Manager In this example, the sysadmin would: 1. Configure the device port that the modem is connected to for dial-in: [SLC]> set deviceport port 1 modemmode text Device Port settings successfully updated. [SLC]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A" Device Port settings successfully updated. [SLC]> set deviceport port 1 auth pap Device Port settings successfully updated. [SLC]> set deviceport port 1 localsecret "password" Device Port settings successfully updated. [SLC]> set deviceport port 1 modemstate dialin Device Port settings successfully updated. [SLC]> 2. Configure the device port that is connected to the console port of the Sun UNIX server: [SLC]> set deviceport port 2 baud 57600 flowcontrol none Device Port settings successfully updated. 3. Dial into the SLC 8000 advanced console manager via the modem using a terminal emulation program on a remote PC. A command line prompt displays. 4. Log into the SLC unit. CONNECT 57600 Welcome to the SLC login: sysadmin Password: Welcome to the SLC Console Manager Model Number: SLC 8048 For a list of commands, type 'help'. [SLC]> SLC™ 8000 Advanced Console Manager User Guide 354